-
Welcome to the Official Eastmans' Forums
Want to join the rest of our members? Feel free to sign up today.
Sign up
Pellet Gun
- Thread starter idcwby
- Start date
JimP
Administrator
I asked that very question a few years ago on another forum and came up with a few rifles to look at.
I ended up getting a RWS 460 Magnum in .22 cal. It is a great little rifle and quite easily takes Eurasian doves at 40-50 yards. But at that range I need to go for a body shot but out to 40 I can do head shots all day long. However it is a little bit out of your price range at $399.
One in your price range that was recommended was the Benjamin 397 in .17, or the 392 in .22.
I don't have a silencer on mine and would say that the report is about that of a .22 short, it isn't as quiet as you might think.
Air rifles like big boy rifles have prices all the way to the ceiling.
I ended up getting a RWS 460 Magnum in .22 cal. It is a great little rifle and quite easily takes Eurasian doves at 40-50 yards. But at that range I need to go for a body shot but out to 40 I can do head shots all day long. However it is a little bit out of your price range at $399.
One in your price range that was recommended was the Benjamin 397 in .17, or the 392 in .22.
I don't have a silencer on mine and would say that the report is about that of a .22 short, it isn't as quiet as you might think.
Air rifles like big boy rifles have prices all the way to the ceiling.
mallardsx2
Veteran member
Benjamin Marauder Synrod Combo | Small Game Rifle | Pyramyd AIR
Get a Benjamin Synthetic Stock Marauder combo, or a Benjamin Synrod combo, with CenterPoint scope and sling - the ideal combo for hunting at Pyramyd AIR.
www.pyramydair.com
I love mine and trust me, and with JSB Jumbo heavy .22 pellets it is potentially the most accurate rifle I own.
If I was going to hunt woodchucks with it I probobly would have went with a .25 caliber....the .22 caliber will kill them dead with head shots.
PS: NOT a toy.
mallardsx2
Veteran member
The .25....
Winchester
Veteran member
Real Question ... why not just get an actual .22. Caliber rifle?
Gr8bawana
Veteran member
Pellet guns do come in handy where it's not legal to use firearms for tasty little pests like this. It works wonders on doves too.
This one is in .177 cal.
idcwby
Administrator
For shooting stuff in the backyard because there is no backdrop, but flat fields.
Winchester
Veteran member
Makes sense, thx.
dirtclod Az.
Veteran member
mallardsx2
Veteran member
I wish I could find a swaging kit for pellets that was affordable.
I would buy one in a heartbeat. I got tons (Literally) of lead I could cast pellets out of and shoot for free.
Nobody makes a casting block that is very effective for pellet guns.
Corbin makes a good press but holy smokes is that expensive and I would have no idea if those pellets even shot well out of my gun until I had made the investment.....Im not risking it.
I would buy one in a heartbeat. I got tons (Literally) of lead I could cast pellets out of and shoot for free.
Nobody makes a casting block that is very effective for pellet guns.
Corbin makes a good press but holy smokes is that expensive and I would have no idea if those pellets even shot well out of my gun until I had made the investment.....Im not risking it.
kidoggy
Veteran member
no risk ,no gain! sounds like there could be a market , stop waiting for another to develop the product and get on it.
mallardsx2
Veteran member
They do sell some cast moulds in the UK but your gun needs to fire at something like 190 bar to be able to shoot the things cause they are so heavy...
mallardsx2
Veteran member
On it. 
It would require an extreme ball end mill tool and you may need to have access to a High speed milling machine.
Not sure what the RPM'S would need to be for such a small end mill but it would have to be pretty darn fast. Potentially 10,000 RPM.
It would require an extreme ball end mill tool and you may need to have access to a High speed milling machine.
Not sure what the RPM'S would need to be for such a small end mill but it would have to be pretty darn fast. Potentially 10,000 RPM.
Last edited:
mallardsx2
Veteran member
Let me see what one of those JSB Jumbo exacts mic out at and I will draw something up in CADD.
A CNC would be about the only effective way to mill it but conventional milling may product a good result if the machine would spin the tool fast enough and you can get a bevel tool with the right angle for the skirt....
The real issue comes into play with figuring out how to create the "Inside Skirt".... thats why they "swage" them.
Heck im ok with just taking a ball endmill of the right diameter and plunging into the pieces to make something that would at least shoot out the end of the gun. It would likely be way too heavy (Shaped like and upside down "U"" for the amount of power my airgun puts out though....
After looking for lee blank blocks I realized that there is even a run on those right now. OUT OF STOCK. Even a BB gun project has been effected by politics....Unreal...
A CNC would be about the only effective way to mill it but conventional milling may product a good result if the machine would spin the tool fast enough and you can get a bevel tool with the right angle for the skirt....
The real issue comes into play with figuring out how to create the "Inside Skirt".... thats why they "swage" them.
Heck im ok with just taking a ball endmill of the right diameter and plunging into the pieces to make something that would at least shoot out the end of the gun. It would likely be way too heavy (Shaped like and upside down "U"" for the amount of power my airgun puts out though....
After looking for lee blank blocks I realized that there is even a run on those right now. OUT OF STOCK. Even a BB gun project has been effected by politics....Unreal...
Last edited:
Hilltop
Veteran member
I have the equipment covered... https://www.breeza.com/