This is a cool topic and something I too would like to understand better. I was actually thinking of starting this topic so I'm really glad to see it up now.
I understand the science of thermals but how to hunt smart using the thermals properly is something I want to understand better.
As far as the direction of the thermals, if you are hunting a cool north face, my understanding is the thermal will often continue to move downhill until say 9 or 10 am, then uphill during the heat of the day, then down hill again in the last hour or two of daylight. If there are prevailing winds, or swirling winds they can easily overpower the thermals.
In an area I will likely be hunting this fall, the elk feed in the lower elevation around 8000 feet. There is an access trail I have been told to hunt that runs basically at a constant elevation 8500 foot elevation (perpendicular to the slope) along some benches, around the ridges and into the draws, crossing three ridges. In the draws, above the trail, there are numerous ponds and wallows just above the trail that the elk will hit during the day (this is a rut muzzleloader hunt). In the morning, the elk will move from their feeding area below the timber (around 8000 feet) and up to their bedding area in the timber (around 9000 feet) crossing the access trail (8500 feet). With the thermals running downhill until around 9 or 10 am, how do should I intercept these elk?
Second if I want to sit the wallows, the thermals will typically switch mid morning moving uphill into the bedding areas.
Any strategies for me?