Savage 7WSM

Nov 7, 2012
105
0
Iowa
Why doesn't Savage make the 'long range hunter" in 7WSM?

Would a 7 Rem Mag be a good substitute in the LRH?

Anybody ever converted a 300WSM LRH to a 7WSM?
 

ssliger

Very Active Member
Mar 9, 2011
900
0
Laramie WY
Probably has to do with availability of ammo and the popularity of the cartridge. I have a 7MM WSM and really like it. The problem is I don't reload and can't get the ammo I use. I was shooting the 160 grain accubonds. Had to switch to 140's and now they are out of stock.
 

Ikeepitcold

Administrator
Staff member
Feb 22, 2011
10,023
1,610
Reno Nv
It seems to me that most long range gun builders all prefer long track actions over short. I've also heard that the WSM is going away and is loosing popularity.
 

libidilatimmy

Veteran member
Oct 22, 2013
1,140
3
Wyoming
I don't even think Winchester is producing the 7mmWSM in their M70 anymore. I think Winchester is the only company making brass for this cartridge as well.
 

SansSouci

Active Member
Nov 3, 2013
207
0
cycloneshooter,

That's a good question.

I saw a short magnum for for this first time this year in an elk camp. I honestly have not seen any other hunter use s short mag. I know nothing about them. I couldn't tell you if they're a fad tat will pass or whether they'll stick around. What I do know is that the .243 Win, .270 Win, 7MM-08 Rem, .30-30 Win, .308 Win, .30-'06, 7MM Rem Mag, .300 Win Mag, and .338 Win Mag and assuredly others that I've missed will be around for a long, long time.

BTW, I still can't figure out why the .280 Rem isn't more popular. In my opinion, it is the best cartridge for all North American big game. Were I a bright dude, I'd own one.

From what I understand, many short magnums are no longer chambered such as the 7MM SAUM & .300 SAUM and Winchester's super short magnum line.

Gr8bawana gave you excellent advice. The 7MM Rem Mag is the most popular magnum cartridge in the world for a reason. If you hand load, you'd find that it will easily surpass factory published ballistics. For instance, I can easily get 3100 FPS with a 160 grain Partition out of my 24" barreled 7MM Rem Mag. I did break 3200 FPS with a 160 grain bullet, but it wasn't as accurate. My 150 grain Nosler load came right out of Nosler's manual. I've choron'd it at better than 3200 FPS. And it will shoot ragged one-hole groups.
 
Nov 7, 2012
105
0
Iowa
My thoughts were to pick up a good used Savage 325 WSM, and then have a second barrel made for 7 WSM.
Beauty of the Savage (along with their reputation for repeatable accuracy) is the simplicity of design and barrel swap.
7 WSM would be my primary go to western gun, and the 325 WSM would be there as a step up for a little more 'thump' on the big stuff.

I agree that neither are very popular, and that unseating some of the 'old reliables' will never happen.
In my mind, the 7mm caliber is king. Better ballistics than the 30s for (150-180gr bullets) and slightly bigger/heavier than the 264s.

My thought is that the 300WSM brass should at least be produced by somebody, and I could either neck up or down to make either if necessary.
 

Kentucky hunter

Active Member
Jul 22, 2013
275
0
loretto ky
Brass is high and hard to find my brother inlaw has 300 wsm I would stick with a long action with a poplar cal I shoot 280 rem an 300 rum both can be a pain to find brass for them