Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Mar 2013
    Posts
    63
    Thanks
    3
    Thanked 11 Times in 9 Posts
    Congratulations
    1
    Congratulated 0 Times in 0 Posts

    D N Z One piece mount

    Does anybody use this mount? Reviews?

  2. #2
    Member
    Join Date
    Sep 2014
    Location
    North Idaho, Tick Fever Country
    Posts
    91
    Thanks
    0
    Thanked 27 Times in 19 Posts
    Congratulations
    0
    Congratulated 0 Times in 0 Posts
    I went with this mount on my Browning BLR. It is a great mount. Super strong and very secure. I would buy another one without question.
    I have a Leupold 3-9 X 40 on the BLR and will soon switch it out for a Nikon Monarch 4-16 X 42. The only thing to consider when you have the one piece mount is the length of the mounting surface on the scope. You can't move the mount rings as the mount is one piece. Short scopes may not have enough mounting surface to fit a one piece mount like the DNZ.
    Last edited by roknHS; 02-12-2015 at 08:50 AM.

  3. #3
    Senior Member
    Join Date
    Dec 2014
    Location
    Oregon
    Posts
    344
    Thanks
    100
    Thanked 121 Times in 95 Posts
    Congratulations
    39
    Congratulated 12 Times in 2 Posts
    I used one on a Rem Model 7, the one with the three hole base set up, the one piece seemed a better way to go. It has been a great set up. Rifle is a "truck" gun, gets borrowed and banged around, seems for about 15 years so far, no issues.

  4. #4
    Member
    Join Date
    Mar 2013
    Posts
    63
    Thanks
    3
    Thanked 11 Times in 9 Posts
    Congratulations
    1
    Congratulated 0 Times in 0 Posts
    Quote Originally Posted by Tim McCoy View Post
    I used one on a Rem Model 7, the one with the three hole base set up, the one piece seemed a better way to go. It has been a great set up. Rifle is a "truck" gun, gets borrowed and banged around, seems for about 15 years so far, no issues.
    Tim,
    What size scope do you have and do you remember the height of your mount? I will be using it on a Model 7 with a 4.5x14 x40 Leupold.

  5. #5
    Senior Member
    Join Date
    Dec 2014
    Location
    Oregon
    Posts
    344
    Thanks
    100
    Thanked 121 Times in 95 Posts
    Congratulations
    39
    Congratulated 12 Times in 2 Posts
    It was an old 3x9 Leupold compact scope. Do not recall mount height, but I always mount as low as I can, so probably a low as that scope has a 33mm Objective lens. You might try contacting DNZ. Most of my 40mm scopes do fine with low mounts, but a few did not. Seems the DNZ has enough height from the base part, that a low might just do it, but I am not sure.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •