Here's one for you. Has anyone out there had any experience with the Ruger #1 and had accuracy issues? I made a trade with my gunsmith and this great looking gun with a custom stock shoots poorly. The group (pattern) spreads vertically. First shot is good, second is 2-3 inches higher and the 3rd is 3" higher, still! I've read a bit on the various sites that this is common with this gun and it has to do with the 2 piece stock and harmonics. The accepted fix for this is a set screw, for which you have to drill and tap the forearm hanger, that applies pressure on the barrel. There is also a kit, I believe it it the Hicks kit, that has an adapter for the forearm hanger and it does the same thing, except you don't have to drill and tap the hanger. There is also a bit of inleting involved. Anyway, before I jump into this project, I wanted to check with the Forum and make sure I'm on the right track. Thanks guys!