Results 1 to 4 of 4

Thread: Fireforming...

  1. #1
    Eastmans' Staff / Moderator
    Join Date
    Feb 2014
    Posts
    4,065
    Thanks
    291
    Thanked 2,255 Times in 1,002 Posts
    Congratulations
    38
    Congratulated 157 Times in 71 Posts

    Fireforming...

    Dan Pickar just put together this video on fireforming using the Kimber Subalpine rifle. I am curious what loads, caliber's etc. that you have used this technique for?
    www.eastmans.com
    blog.eastmans.com
    www.wingmen.us

  2. #2
    Senior Member
    Join Date
    Mar 2016
    Location
    Gypsum, Co
    Posts
    1,661
    Thanks
    106
    Thanked 591 Times in 440 Posts
    Congratulations
    18
    Congratulated 141 Times in 32 Posts
    I have fire formed a lot of brass and did it the same way other than he is just wasting a lot of time and ammo my shooting it without a scope on the rifle.

    If you have a new rifle as in the video you should have your scope mounted and bore sighted and then use the rounds that you are fire forming the brass for to sight in the scope. Then when you go to reload the formed cases and sight in your rifle it will already be sighted in and ready for the fine tuning.

    As for cartridges that I have done it to here is a list of them.

    .25-06 from .30-06 very simple really just a neck sizing job
    .30 Herrett from 30-30 brass, this gets complicated. Forming the brass in a die, trimming it, and then fire forming it.
    .357 Herrett from 30-30 brass. The same as with .30 Herrett.
    7-30 Waters from 30-30 brass. Run it through a sizing die and then fire forming it in your rifle or pistol.
    357 Brain and Davis from .44 mag. You go through a lot of brass with this one.
    .44 Auto Mag from .308 Win. Cut the brass down and start shooting it.
    .357 Auto Mag from .308 Win Cut the brass down and make .44 Auto Mag brass and then run it through the .357 Auto Mag die.
    .340 Weatherby from 300 H&H. It is just easier to buy .340 Weatherby brass.
    Last edited by JimP; 09-06-2017 at 05:57 PM.
    If you don't care where you are, you are not lost....

  3. #3
    Super Moderator
    Join Date
    Feb 2011
    Location
    Reno Nv
    Posts
    7,424
    Thanks
    2,684
    Thanked 1,610 Times in 1,127 Posts
    Congratulations
    707
    Congratulated 711 Times in 118 Posts
    Interesting. Dan said he could buy brass already made for the rifle. Is the ammo available to buy loaded off the shelf?
    ... because every picture tells a story

  4. #4
    Senior Member
    Join Date
    Mar 2016
    Location
    Gypsum, Co
    Posts
    1,661
    Thanks
    106
    Thanked 591 Times in 440 Posts
    Congratulations
    18
    Congratulated 141 Times in 32 Posts

    There are a few manufactures that sell the brass, I believe that Nosler sells loaded ammo
    If you don't care where you are, you are not lost....

  5. The Following User Says Thank You to JimP For This Useful Post:


 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •