View Full Version : Arrow tuning
03-22-2012, 06:32 PM
Does everybody align there broad heads to veins as close as possible? I do but I have talked to several people who say they just screw them on and go. I was just wondering every bodies opinion!! If you are a screw and go person what broad heads are you using? Thx
03-22-2012, 06:36 PM
no, I do not allign them. I have never noticed a difference when the random one ends up being alligned compared to those that are not.
slick trick magnum 100gr for me.
03-22-2012, 06:47 PM
I don't need to with slick tricks, but the old Thunderheads had to be perfectly tuned.
03-22-2012, 08:46 PM
Nope. Never needed to go to that step. A little tweak to my rest is all I need for sighting in my broadheads.
03-22-2012, 09:35 PM
I always have done it, did I need to? I dont know…
03-22-2012, 09:58 PM
I align my G5 Montecs. I'm not sure if it matters that much, but it can't hurt.
03-23-2012, 12:38 PM
There is no need to align broadheads with the veins. Just make sure the arrow shaft ends are square and that there is no wobble with the broadhead attched doing a spin test. If the broadheads are not perfectly square with the arrow they act as another set of veins and steer the arrow.
03-23-2012, 02:39 PM
I agree to a point, but I have broad heads that work just fine with out aligning and others that you had too. That why I was wondering about what everybody shot. Thx
03-23-2012, 04:02 PM
There is no need to align broadheads with the veins. Just make sure the arrow shaft ends are square and that there is no wobble with the broadhead attched doing a spin test. If the broadheads are not perfectly square with the arrow they act as another set of veins and steer the arrow.great advice, I shoot a two blade Magnus Stinger so it's hard to align with veins and I have no problem with flight as long as the broadhead spins true on the arrow.
03-23-2012, 07:29 PM
Aligning broadheads isn't a deal-breaker but when I do refletch they end up aligned just to fit in the quiver better.
03-23-2012, 08:22 PM
I do all of my motecs on my gt xt hunters.I think it makes my broad head arrows group better.
03-31-2012, 09:31 PM
I get them close with my muzzy's but i dont get them perfect, Im shooting a 2.1 fusion vane, 3 vanes with slight right hand helical, I think having them off just a bit helps it spin faster but might just be me....
I shoot either 2 or 4 blade broadheads and 3 fletch (feathers mostly) so no by default.
Powered by vBulletin® Version 4.2.2 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.